Encouraged by the frame try out it was time to look at the engine.
A complete strip and rebuild followed. After fitting the alternator
which I got from Germany I decided to try for a spark.
Next was a paint session.Nice!
All I need is a piston, and some paint on the cylinder head...
A piston has arrived and been fitted, I need to know whether it will run or not now.
I say that as the piston is a good 4mm below the cylinder top TDC.
Then there's the ports, at BDC the piston is 3mm below the port base, still...
Whilst pondering this little problem I decided
to make a start on the wheels, no going back now...